poltrt.blogg.se - Honeywell alarm keypad manual

#Honeywell alarm keypad manual code#
#Honeywell alarm keypad manual plus#

The entry delay is the grace period before the alarm sounds. INSTANT: Arms the security system in "stay" mode, but removes the entry delay.The motion detectors armed in NIGHT-STAY is programmed by your security installer. To do so, press the stay button twice after entering your security code.

#Honeywell alarm keypad manual plus#

NIGHT-STAY: Arms all perimeter sensors, plus a few motion detectors.

This enables all sensors except for motion detectors.

STAY: Arms the security system in "stay" mode.

The delay resets if an exit door is opened within the last ten seconds of exit delay. The security panel repeatedly beeps until the exit delay (time you have to leave the premises) ends, and beeps rapidly within the last 10 seconds. This enables all sensors, including motion detectors, doors, windows, and glass break detectors.

AWAY: Arms the security system in "away" mode.

OFF: Disarms the security system, and clears any previous alarms or faults.

Then press the following keys depending on what you are doing:

#Honeywell alarm keypad manual code#

Bypassed zones will not trigger an alarm when they are opened.Įnter your security code on the keypad.

Arm Custom: Arms the security system, but allows for bypassing of up to five zones.

During the exit delay, the alarm will count down the amount of time until the alarm is fully armed, and beep rapidly within the last 10 seconds.

Arm Away: Arms the security system in "away" mode.

If the entry delay is off, then opening any set entry/exit door before disarming the system will immediately sound the alarm.

Entry Delay: Turns the entry delay on or off.

The motion detectors armed in night mode are set by your installer. This enables all perimeter sensors, plus a few motion detectors. Night Stay: Arms the security system in "night" mode.Arm Stay: Arms the security system in "stay" mode.

Disarm: Disarms the security system, regardless of which mode the alarm is in, and clears any previous alarms or faults.

You can select between a few arming modes: Built-in two-way voice capability with VOX (voice-activated switching) provides additional security and emergency contact with the control monitoring station.Select the mode to arm the security system. The panel can also report alarms to another land-line phone location or cell phone using Voice Event Notification.

When powered by the optional line carrier transformer, adding X10-based modules lets customers control lights, appliances, and other devices.Simon XT can send messages to a central monitoring station using SIA or Contact ID (CID) formats. ELM (encrypted LearnMode) technology secures every keychain touchpad transmission. Choose from the Remote Handheld Touchpad, two-, four-, or five-button crystal or SAW Keychain Touchpads (keyfobs), or two-button ELM Keychain Touchpad. With latchkey capabilities, the panel can be programmed to notify customers if the system has not been disarmed at a scheduled time.Simon XT supports convenient system operation from anywhere within the premises with the use of wireless touchpads. The built-in radio receiver works with both crystal and SAW LearnModeTM sensors.Simon XT supports off-premises telephone control to arm and disarm the system, check system status, activate no-entry delay, or activate the latchkey feature. With a built-in display touchpad and a status speaker that provides visual and voice messages for feedback, Simon XT is well suited for houses, apartments, and condominiums.The Simon XT panel comes standard with 40 wireless zones, or it can be set up with 38 wireless zones and two built-in hardwired supervised burglary zones (normally-closed loop only). Simon XTTM is a cost-effective security system that offers up to 40 zones of burglary and fire protection, and which complies with SIA False Alarm Standards.